0 items

Vileda ProMist is the integrated spray mop cleaning system that’s always ready for quick, deep cleaning.

 

Check out the amazing cleaning features of Vileda ProMist:

No need for a bucket

Detachable 750ml capacity refillable bottle*.

 

360° swivel head

For exceptionally flexible cleaning.

Fine mist sprayer

For controlled, even coverage.

 

 

1-touch bottle release

For easy bottle removal when filling.

 

Microfibre cleaning pad

Thousands of tiny fibres lift and capture grease, dust and dirt. Red scrub zone removes stubborn dirt effectively. Buy refill here

Machine washable pad

Easy to remove and replace. Caution: Do not bleach or use fabric softener to clean the pad. Do not tumble dry. Do not iron. Lay pad flat to dry.

 

 

Compatible disposable wipes

Antibacterial Fresh wipes kill 99.9% of germs and are great for bathrooms and kitchens. Electrostatic dry wipes for exceptional dusting.

 

Cloth holders

Simply push the cloths into the clips on the top of the pad base.

Suitable for most hard floor surfaces

Follow floor manufacturers or installers guideleines. Do not use on unfinished, oiled or waxed wooden boards, non-sealed tiles or carpet.

 

 

Always read the packaging, use only as directed.

 


HOW TO USE

 

FOR DRY CLEANING:

When using for dry mopping, don’t use the spray function. The Microfibre cleaning pad attracts and holds dust, dirt, hair and allergens. Remove pad after use and wash in the washing machine.

 

FOR WET CLEANING:

 

1. Push button to release the bottle from the unit, remove bottle by pulling it up and out of its holder. Screw off the red cap.

 

2. Fill bottle with water or mix with up to 2 teaspoons of your favourite NON OIL BASED cleaning solution. Screw the cap on tightly and shake to mix.
Caution: Do not use with oil based cleaning solutions as this may damage the mechanism. This includes eucalyptus oil, essential oils and essences. For best performance, do not store unused liquid in the bottle.

 

3. Push the bottle down into the holder until it “clicks” firmly back into position.

 

4. Squeeze trigger to release a fine mist of liquid onto the floor. You may need to activate the trigger several times at first.

 

5. When finished, peel pad from the strips. The Durable Microfibre Pad is machine washable at 40°C-60°C or hand wash at up to 60°C.
Caution: Do not bleach or use fabric softener to clean the pad. Do not tumble dry. Do not iron. Lay pad flat to dry.

 

WHAT IS MICROFIBRE?

Microfibre is made up of millions of microscopic fibres that grab and hold dirt, dust, allergens and moisture. It’s so effective that microfibre is a common cleaning tool used in hospitals to keep dirt and germs away.

 
 

TROUBLESHOOTING GUIDE

Does not mist?
Be sure bottle with liquid is securely pressed into place with a “click”. Activate the trigger several times. If the ProMist still doesn’t spray, the nozzle may be clogged. Unscrew and carefully remove the red nozzle located just below the refill bottle. Rinse the nozzle under warm water until nozzle is clean. It may be necessary to soak the nozzle or bottle in hot water.

Bottle is leaking?
Check that the cap is tightly secured. It is normal to see a small amount of liquid in the reservoir.


Pad will not stay in place?
Check black strips on base for dirt or debris. Remove debris as needed. Leaves streaks on the floor? Cleaning pad may need to be washed or replaced or you may be using too much cleaning solution. If your cleaning solution calls for ¼ cup of solution for four litres of water, you should only use less than 2 teaspoons of cleaning solution to 2 cups (a full ProMist bottle) of water.

Caution: Do not use with oil based cleaning solutions as this may damage the mechanism. This includes eucalyptus oil, essential oils and essences. For best performance, do not store unused liquid in the bottle.

This site uses cookies. By continuing to browse this site you are agreeing to our use of cookies. Find out more here.
x