Cleaning Robot - Cleans for you everyday so you can enjoy life

 

How it works

Step 1

Side brush for cleaning edges and corners

Step 2

Two counter-rotating brushes to pick-up particles and hair

Step 3

Vacuum power to collect fine dust

 

 

Features

Intelligent Navigation System

Avoids obstacles, goes under furniture. Cleans corners and along edges.
Moves intelligently around the house, all by itself.

3 Cleaning Programs

Just press one button and a powerful 3-step cleaning system leaves your floors free of particles, dust and hair.

  1. Side brush for cleaning edges and corners
  2. Two counter-rotating brushes to pick-up particles and hair
  3. Vacuum power to collect fine dust
For different room sizes: S, M, L. Up to 80 minutes!

Drop Sensors

The Cleaning Robot is specially designed to avoid falling down stairs. Thanks to the compact design the Cleaning Robot easily cleans corners, edges and under furniture.

 

Ideal for all Types of Hard Floors

The Cleaning Robot cleans not only tiles, parquet and linoleum but is also good on short-piled carpets.

Corner cleaning

Thanks to the lateral brush and the compact design the Cleaning Robot easily cleans corners, edges and under furniture.

 

Rechargeable Batteries

You can easily connect the supplied battery charger into the battery charging socket located besides the power switch.

  • Battery type: 14,4 V DC, 1700 mAh NiMH
  • Charging time is about 4-5 hours

Dustbins

Easy to empty!

  1. Turn off the power switch
  2. Press down the dustbin release button and pull out the dustbin after emptying it
  3. After emptying it reinsert the dustbin and push until you hear a clicking sound
 

Maintenance

How to clean the filter

  1. Turn the dustbin upside down
  2. Press the bottom slightly and take the filter mesh out
  3. Clear the dirt on the filter mesh
  4. Reinsert the filter mesh and press slightly until it clips
  5. Reinsert the dustbin in the robot

How to clean the main brushes

  1. Put the robot on a flat surface with its bottom up
  2. Use a cross-head screwdriver to remove the fixing screw
  3. Take out the main brushes
  4. Remove all hair and dirt from the brushes
  5. Put the brushes back and tighten the screw

How to clean the vacuum inlet cover

  1. Turn the robot upside down
  2. Remove the vacuum inlet cover as shown
  3. Clean the vacuum inlet cover and the fan mechanism to ensure good ventilation.
  4. Reinsert the vacuum inlet cover by guiding the hinge tabs back into the holes carefully
Este sitio web utiliza cookies por razones técnicas y para facilitar la navegación. Si continúas visitando este sitio, aceptas nuestra política de cookies. Será posible borrar las cookies o anular el consentimiento a utilizarlas mediante la configuración de tu navegador web. Leer más.
x